background image

Unpacking

Carton Contents:

• Pressure washer unit
• Manual
• Trigger gun
• Adjustable spray wand
• Needle clean out tool
• High pressure hose
• Trigger gun holder
• Hose/cord holder
• Garden hose adaptor (female coupler)

1. 

Carefully remove the contents from the shipping carton. 
Make sure that all items listed in the carton contents are 
included.

2. 

Inspect the product carefully to make sure no breakage 
or damage occurred during shipping. If you find damaged 
or missing parts, DO NOT return to the store. Please call 
1-866-766-9563. 

NOTE:

 Do not discard the shipping carton and packaging 

material until you are ready to use your new Electric Pressure 
Washer.

Assembly

1. 

Position the washer as NEAR as possible to the water 
supply.

2. 

The washer must be used on a secure and stable surface 
in a standing, upright position (Fig. 1). 

3. 

Fit the spray wand into the gun and rotate it until the two 
parts are completely locked (Fig. 2).

4. 

Connect the high pressure hose to the trigger gun (Fig. 3).

5. 

Connect the high pressure hose to the water outlet on the 
washer (Fig. 4).

m

WARNING! 

Keep hose away from sharp objects. 

Bursting hoses may cause injury. Examine hoses regularly and 
replace if damaged. Do not attempt to mend a damaged hose.

6. 

Connect the garden hose adaptor (female coupler) to 
the water inlet of the pressure washer, then thread your 
garden hose (male end) into the garden hose adaptor  
(Fig. 5). The garden hose must have an internal diameter 
of at least 13 mm (1/2 in.) and must be reinforced. 

Fig. 1

Fig. 2

Push to release

High pressure hose

Trigger gun

Fig. 3

RELEASE

Fig. 4

(FRONT)

High pressure 
water outlet

High pressure hose

5

Summary of Contents for PRESSURE JOE SPX1000RM











Reviews: