SNOWJOE Martha Stewart MTS-WDV40 Operator'S Manual Download Page 1

Model MTS-WDV40

Form No. SJ-MTS-WDV40-880E-M

OPERATOR’S MANUAL

ELECTRIC WET/DRY VACUUM

3.5 HP | 8.5 AMP | 4 GAL | CYCLONE FILTRATION

© 2018 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

SAVE THESE INSTRUCTIONS

1

IMPORTANT!

Safety Instructions
All Operators Must Read These 

Instructions Before Use

Any electrical appliance can be dangerous if used incorrectly. 

Some of the safety precautions given in this manual apply 

generally to many appliances. Other warnings are specific to 

the use of this electric wet/dry vacuum.
Always follow these safety guidelines. Failure to do so may 

result in personal injury or property damage.

m

WARNING! 

This unit can be dangerous! Careless or 

improper use can cause serious injury.

General Safety
FOR HOUSEHOLD USE ONLY

Before using, be sure that everyone using this tool reads 

and understands all safety instructions and other information 

contained in this manual. Save this manual and review it 

frequently prior to using this tool and when instructing

others on the proper operating procedures.

m

CAUTION!

 

Wear appropriate hearing protection during 

use. After long periods of extended use, the noise generated 

from this appliance may cause hearing loss if your ears are  

not properly protected.

m

WARNING! 

To reduce the risk of injury, inspect the 

filters frequently and replace with recommended replacement 

if there are signs of wear or deterioration.
Before using the wet/dry vacuum, take the time to familiarize 

yourself with the controls, especially how to stop the wet/dry 

vacuum in an emergency. The only individuals who should 

use the wet/dry vacuum are those who have a thorough 

understanding of the instructions and who know how to 

operate the machine. Children should never be allowed access 

to the wet/dry vacuum.
Retain this manual for future reference.

1. Keep 

filters

 in place – 

Ensure that the equipment is 

assembled correctly and the filters are in the correct 

position.

2.  Keep bystanders and children away – 

All bystanders, 

including children and pets, should be kept a safe 

distance away from the work area.

3.  Disconnect tool – 

Disconnect the wet/dry vacuum from 

the power supply when not in use, before servicing, when 

transporting, or when changing accessories. 

4.

 

Do not use in dangerous environments – 

Do not use 

the wet/dry vacuum in rain, damp or wet locations. Do 

not operate the wet/dry vacuum in gaseous or explosive 

atmospheres or use the wet/dry vacuum to pick up 

flammable or combustible liquids. Motors in these tools 

normally spark, and the sparks might ignite fumes.

5.  Check for damaged parts – 

Before using the wet/dry 

vacuum, repair or replace any part that is damaged. In 

addition, check for alignment of moving parts, binding of 

moving parts, breakage of parts, and any other conditions 

that may affect the tool's operation.

 

 

Inspect the appliance cord periodically. If damage is 

found, have it repaired by an authorized service facility. 

Extension cords should also be inspected periodically and 

immediately replaced if damaged. 

6.  Avoid unintentional starting – 

Make sure the switch is off 

before plugging in the appliance.

7.  Use the right tool – 

Do not force the tool or any 

attachment on the tool to do a job for which they were  

not designed.

8.  Wear face or dust masks – 

If operated in dusty 

environment, the use of a face or dust mask specially 

designed to filter out microscopic particles is 

recommended.

9.  Maintain tools with care – 

Keep tools clean for best 

and safest performance. Follow instructions for changing 

accessories. If the appliance is not working as it should, or 

has been dropped, damaged, left outdoors, dropped into 

water, please call Snow Joe

®

 + Sun Joe

®

 customer service 

center at 1-866-SNOWJOE (1-866-766-9563). 

10. Use recommended accessories –

 Consult the owner’s 

manual for recommended accessories. The use of 

improper accessories may cause risk of injury. 

11. Do not abuse the cord – 

Never carry the appliance by its 

cord or yank it to disconnect it from the receptacle. Keep 

the cord away from heat, oil, and sharp edges.

12. Do not force the appliance –

 It will do the job better and 

with less likelihood of a risk of injury if it is used at the rate 

for which it was designed.

13. Do not overreach – 

Keep proper footing and balance  

at all times.

Summary of Contents for Martha Stewart MTS-WDV40

















Reviews: