background image

4

Double-Insulated Appliances

In a double-insulated appliance, two systems of insulation 

are provided instead of grounding. No grounding means is 

provided on a double-insulated appliance, nor should a means 

for grounding be added to the appliance. Servicing a double-

insulated appliance requires extreme care and knowledge 

of the system, and should be performed only by qualified 

service personnel at an authorized Snow Joe

®

 + Sun Joe

®

 

dealer. Replacement parts for a double-insulated appliance 

must be identical to the parts they replace. A double-insulated 

appliance is marked with the words “Double Insulation” or 

“Double Insulated.” The symbol     (square within a square) 

may also be marked on the appliance.
 

   

DOUBLE-INSULATED: GROUNDING NOT  

 

                  REQUIRED. WHEN SERVICING, USE ONLY    

                 IDENTICAL REPLACEMENT PARTS.

This wood c shredder is double-insulated, eliminating 

the need for a separate grounding system. Use only identical 

replacement parts. Read the instructions before servicing 

double-insulated appliances. Use this electric wood c 

shredder only as described in this manual. 

Summary of Contents for Martha Stewart MTS-EWC15

















Reviews: