12
2.
Make a loop in the power cord and push it up through the
hole in the handle and around the cord restraint hook
(Fig. 12), then connect the extension cord to the appliance
cord.
3.
Make sure the guide bar is not touching the ground or any
other object.
4.
Hold the chain saw firmly with both hands.
5.
To turn the tool ON, push and hold the safety lock button
with your thumb, then squeeze the trigger with your
fingers. Once the tool is running, release the safety lock
button (Fig. 13).
6.
To turn the tool OFF, release the trigger switch (Fig. 13).
NOTE:
Do not press the trigger switch until you are ready to
make a cut.
Operating Tips
m
WARNING!
For your safety and that of others:
1.
Do not use the machine without reading the instructions
carefully. Become acquainted with the controls and
the proper use of the machine. Learn how to stop the
machine quickly.
2.
Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
3.
Always wear suitable clothing when using the machine.
Wear anti-vibration gloves and other personal protective
equipment.
NOTE:
All the above-mentioned precautions do not,
however, guarantee the prevention of certain risks – i.e.
Raynaud’s phenomenon or carpal tunnel syndrome. For
operators who use this machine for prolonged periods,
it is recommended to have periodic checkups on their
hands and fingers. If any of the above mentioned
symptoms should appear, please contact a physician
immediately.
4.
Work only in daylight or good artificial light.
5.
Take utmost care when working near metal fences.
6.
Take care not to hit the bar hard against foreign objects or
flying debris caused by the movement of the chain.
7.
Do not operate the chain saw in a tree, on a ladder, or on a
scaffold. This is extremely dangerous.
8.
Use extreme caution when cutting small brush, saplings,
or limbs under tension. Such slender and tense material
may catch the saw and whip back towards you, pull you
off balance, or spring back.
9.
Do not cut vines and/or small underbrush.
10.
Before you start the unit, make sure the chain saw is not
contacting any object.
m
CAUTION!
The chain coasts after the saw is turned off.
Do not use the tool under wet conditions.
IMPORTANT!
Always remember that an incorrectly used chain
saw may harm or disturb others and have a serious impact on
the environment.
To respect people and the environment:
• Avoid using the machine in environments or at times of the
day when it may disturb others.
• Scrupulously comply with local regulations and provisions
for the disposal of waste materials after sawing.
• Scrupulously comply with local regulations and provisions
for the disposal of oils, damaged parts, or any elements
that have a strong impact on the environment.
• A certain amount of chain lubricating oil is released into
the environment when the machine is running, so only use
biodegradable oils made specifically for this use.
• To avoid the risk of fire, do not leave the machine with a
hot motor on leaves or dry grass.
Fig. 12
Cord restraint hook
Fig. 13
Safety lock button
Trigger switch