manualshive.com logo in svg

SNOWJOE iON15SB-CT, Operator'S Manual

Share
Download
SNOWJOE iON15SB-CT Operator'S Manual Download Page 6

6

Know Your Cordless Snow Blower

Read the owner’s manual and safety rules carefully before operating your cordless snow blower. Compare the illustration  

below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this 

 

manual for future reference.

Technical Data

Battery Voltage* ..............................40 V D.C.

Battery Capacity .............................See page 17 for battery 

 

options and specifications

Charging Time ................................See page 17 for battery 

 

options and specifications

Run Time Max

 ................................See page 17 for battery

 

options and specifications

No Load Speed ..............................

1700 rpm ± 10%

Rotor ...............................................

2-blade, cold and abrasion-

 

resistant plastic

Motor ..............................................500 W brushless

Clearing Width 

15 in. (38 cm)

Depth of Snow Cut 

8 in. (20 cm)

Throw Distance Max 

20 ft (6 m) 

Plowing Capacity Max 

11 tons/charge

 

(10 metric tons/charge)

Type of Snow 

Light, fluffy

Tire Size 

6.3 in. (16 cm)

Directional Control 

180º auto-rotate chute

Weight (snow blower alone) 

19.4 lbs (8.8 kg)

Weight 

(snow blower with battery installed) 

20.9 lbs (9.5 kg)

*Initial no-load voltage, when fully charged, peaks at 40 volts; nominal voltage under typical load is 36 volts.

1.  ON/OFF switch lever
2.  Handle bar
3.  Safety switch button
4.  Upper handle
5.  Upper chute crank
6.  Cotter pin
7. 

Cord clip (2)

8.  Middle frame
9.  Lower chute crank
10. 

Handle knob (2)

11. 

Chute deflector

12. 

Deflector knob (2)

13. Discharge chute
14. Battery compartment 
15. Battery compartment latch
16. Main cover
17. 

Wheel (2)

18. Side cover
19. Auger
20. Scraper bar
21. Push button for battery indicator
22. Battery indicator
23. Push lock button
24. iONMAX 40V lithium-ion battery  

featuring exclusive EcoSharp

®

  

technology (iBAT40, iBAT40XR, 

 

or iBAT40XRP) – SOLD SEPARATELY

25. iONMAX 40V battery charger  

(model iCHRG40) or iONMAX 

 

40V dual port battery charger  

(model iCHRG40-DPC) – 

 

SOLD SEPARATELY

1

2

4

6

5

10

11

12

13

19

20

3

8

7

9

16

17

18

14 15

21 22

23

24
25

Summary of Contents for iON15SB-CT





















Reviews:

No comments

Brands by name

Popular brands

Load more brands