Fitting the Suction Hose and Tube
1. Connect the suction hose to the metal container by
screwing the rotatable plastic end piece of the suction
hose (the end with the printed symbol) into the hose
connection.
2.
Check that the suction hose is securely affixed to the
metal container via this bayonet connection (Fig. 6).
NOTE: When assembling/detaching the suction hose,
hold the black plastic end piece, not the metal suction
hose. Twisting or bending the hose could damage it.
3. Insert the suction tube into the rigid end piece of the
suction hose (Fig. 7).
Switching ON/OFF
1. Connect the mains plug.
NOTE:
The equipment is fitted with a safety stop switch,
which allows for operation only when the pleated filter and
wire filter basket are installed correctly.
To switch the unit on:
Set the On/Off switch (Fig. 8) to position “
–”.
To switch the unit off:
Set the On/Off switch to position “
o”.
Operation
m
WARNING!
The vacuuming of glowing embers and
materials that are combustible, explosive or harmful to your
health is prohibited. Failure to adhere to this warning could
result in severe personal injury.
•
Place the equipment on a level surface that is not heat
sensitive.
•
Always use the suction tube for vacuuming. Hold the
suction tube at a distance of approximately 0.4 in. (1 cm)
above the ash.
•
Vacuum only cooled ash that is less than 100°F (40°C).
•
When vacuuming, check the metal container and suction
hose periodically to ensure there is no rise in temperature.
• In the event of a rise in temperature, switch off the
equipment and disconnect the plug. Place the equipment
outside and monitor it as it cools.
•
During rest periods, use the accessory holder located on
the container lid to secure the suction tube.
•
Always use the carry handle for transporting the
equipment.
• In order to ensure that the pleated filter remains clear, fill
the metal container no more than halfway.
•
Empty the container outside in order to avoid a mess (see
“Cleaning/Maintenance”).
• Clean the pleated filter (see “Cleaning/Maintenance”) if the
suction performance deteriorates or when the inspection
window blockage indicator on the container lid turns red.
Fig. 6
Fig. 7
Fig. 8
7
Summary of Contents for ASHJ201
Page 12: ...snowjoe com ...
