4
4. Using the M6x50 screw and s-type nut, secure the hose
holder in place (Fig. 5).
Operation
1. Wearing work boots or other appropriate close-toed
shoes, firmly step down on the base and push the primary
and secondary stakes completely into the ground (Fig. 6).
Make sure your steel garden hose holder is secure
before use.
m
WARNING!
Do not install your steel garden hose holder
in soft ground or mulch.
2. Connect your water source to the rear inlet (Fig. 7).
3. Connect your hose to the front faucet (Fig. 7).
S Support
If your Aqua Joe
®
SJ-SHSBB-WHT steel garden hose holder
requires service or maintenance, please call Snow Joe
®
+
Sun Joe
®
customer service at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
Model + Serial Numbers
When contacting the company or arranging service from an
authorized dealer, you will need to provide the model and serial
numbers, which can be found on the decal located on the steel
garden hose holder. Copy these numbers into the space
provided below.
Fig. 5
M6x50 Screw
S-type
nut
Fig. 6
Base
Primary stake
Secondary
stake
Fig. 7
Front
faucet
Rear
inlet
Record the following numbers from your new product:
Model #:
Serial #:
S J - S H S B B - W H T
