background image

6

Unpacking

Carton Contents

•  Electric snow shovel
•  Joint-fixing knob and bolt
• 

Adjustable handle and knob

•  Manual

1.  Carefully remove the electric snow shovel and check to 

see that all of the above items are supplied.

2.  Inspect the product carefully to make sure no breakage or 

damage occurred during shipping. If you find damaged or 

missing parts, DO NOT return the unit to the store. Please 

call the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563

).

  NOTE: Do not discard the shipping carton and packaging 

material until you are ready to use your new electric snow 

shovel. The packaging is made of recyclable materials. 

Properly dispose of these materials in accordance with 

local regulations.

IMPORTANT! The equipment and packaging material are  

not toys. Do not let children play with plastic bags, foils 

or small parts. These items can be swallowed and pose a 

suffocation risk!

Assembly

Connecting the Upper and Lower Tubes

1.  Before connecting the upper and lower tubes, slide the 

adjustble handle onto the upper tube at the middle section 

(Fig. 1).

  NOTE: Do not try to install the adjustable handle after the 

tubes are assembled.

2.  Slide the upper tube inside the lower tube and align the 

screw holes (Fig. 2).

3.

  Insert the joint-fixing bolt through the aligned holes in the 

upper and lower tubes and secure the other end with the 

joint-fixing knob (Figs. 3 & 4).

  NOTE: You may have to carefully move the wiring inside 

the tube to one side if it blocks the path of the bolt. (Use 

the shipping wire to maneuver the electrical wiring; do not 

use a sharp tool.)

Fig. 1

Upper 

tube

Adjustable 

handle

Middle 

section

Lower tube

Fig. 2

Lower tube

Upper tube

Fig. 3

Joint-fixing bolt

Fig. 4

Joint-fixing knob

Joint fixing bolt

Summary of Contents for 323E-PRO

















Reviews: