3
Assembly
Upper and Lower Tube Assembly
1.
To secure parts during shipping, a wire is wrapped around
the upper and lower tube sections. Remove it, but don’t
discard (Figure 1).
2.
Slide the lower tube (B) into the upper tube (A) (Figure 2).
Note:
Before you connect the tubes, you may find it easier
to remove the slack in the wire. Slightly pull the wire from
the bottom of the lower tube (B) before you join the tubes
together.
m
CAUTION
m
Inspect wiring, which, if damaged during shipping,
may cause serious bodily injury during equipment use.
If any damage is seen or suspected, do not assemble.
Instead, contact Snow Joe Customer Service
(1-866-SNOW JOE) for assistance.
Handle with care during assembly so that electrical
wiring does not become damaged.
Figure 1
A.
Shipping wire
A
Figure 2
A.
Upper tube
B.
Lower tube
A
B
Adjustable handle
