background image

16

50% capacity (2 lights on) during off-season storage to 

maintain optimal battery performance.

Battery C  

Disposal Information

Always dispose of your battery packs according to federal, 

state, and local regulations. Contact a recycling agency in your 

area for recycling locations.

m

CAUTION!

 Even discharged battery packs contain 

some energy. Before disposing, use electrical tape to cover the 

terminals to prevent the battery packs from shorting, 

 

which could cause a fire or explosion.

m

WARNING!

 To reduce the risk of injury or explosion, 

never burn or incinerate battery packs even if it is damaged, 

dead or completely discharged. When burned, toxic fumes 

and materials are emitted into the surrounding atmosphere.

1.  Batteries vary according to device. Consult your manual 

for specific information.

2.  Install only new batteries of the same type in your product 

(where applicable).

3. 

Failure to insert batteries in the correct polarity, as 

indicated in the battery compartment or manual, may 

shorten the life of the batteries or cause batteries to leak.

4. 

Do not mix old and new batteries.

5. 

Do not mix Alkaline, Standard (Carbon-Zinc) or 

Rechargeable (Nickel Cadmium, Nickel Metal Hydride, 

 

or Lithium-Ion) batteries.

6. 

Do not dispose of batteries in fire.

7.  Batteries should be recycled or disposed of as per state 

and local guidelines.

S Support

If your Snow Joe

®

 24V-X2-SB15 cordless snow blower 

requires service or maintenance, please call the Snow Joe

®

 +  

Sun Joe

®

 customer service center at 1-866-SNOWJOE 

 

(1-866-766-9563).

Model + Serial Numbers 

When contacting the company, reordering parts or arranging 

service from an authorized dealer, you will need to provide the 

model and serial numbers, which can be found on the decal 

located on the housing of the unit. Copy these numbers into 

the space provided below.

24VCHRG-DPC

Federal Communications Commission 

(FCC)

m

WARNING!

 Any changes or modifications to this 

unit not expressly approved by the party responsible for 

compliance could void the user's authority to operate the 

equipment.

Class B device:
NOTE:

 This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to part 15 

of the FCC Rules. 
These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. 

This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance 

with the instructions, may cause harmful interference to 

 

radio communications. 

However, there is no guarantee that interference will not occur 

in a particular installation. 

If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct 

the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment 

 

and receiver.

•  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician 

for help.

Record the following numbers from the housing or handle of your  

new product:

Model #:

Serial #:

2    4   V   -   X  2   -   S   B  1  5

Summary of Contents for 24V-X2-SB15





















Reviews: