background image

9

Charger Operation

m

WARNING! 

Charge only iON+ 24V lithium-ion battery 

packs with its compatible iON+ 24V lithium-ion charger. Other 

types of batteries may cause personal injury and damage.
To reduce the risk of electric shock, do not allow water to flow 

into the charger's AC/DC plug.

When to Charge the iON+ 24V  

Lithium-Ion Battery

NOTE: The iON+ 24V lithium-ion battery packs do not develop 

a "memory" when charged after only a partial discharge. 

Therefore, it is not necessary to run down the battery pack 

before placing it into the charger. 

•  Use the battery charge indicator lights to determine when to 

charge your iON+ 24V lithium-ion battery pack. 

•  You can "top-off" your battery pack's charge before starting 

a big job or after a long day of use.

Charging the Battery

1.  Press the push lock buttons on the battery to pull the 

battery pack out of the equipment (Fig. 1).

2.  Depending on your Snow Joe

®

 + Sun Joe

®

 charger 

model, how to recharge your lithium-ion battery will vary. 

You may either insert your 24-volt battery into the  

24VCHRG-QC Quick Charger (sold separately) or the 

24VCHRG-DPC Dual Port Charger (sold separately)  

(Figs. 2 – 3).

3.  The battery indicator LEDs will illuminate one by one 

during the charging process. Unplug the charger 

immediately when the 3 LEDs are all illuminated.

4.  The 24VCHRG-QC Quick Charger (sold separately) and 

the 24VCHRG-DPC Dual Port Charger (sold separately) 

are also equipped with additional charging indicating 

lights which will indicate the charging status (Figs. 2 – 3). 

m

CAUTION!

 FIRE HAZARD. When disconnecting the 

charger from the battery, be sure to unplug the charger from 

the outlet first, then disconnect the charger from the battery.

m

WARNING!

  The chargers  do not automatically turn 

off when the battery is fully charged. 

Please take care not 

to leave the battery plugged into the charger. Switch off or 

unplug the charger at the mains when charging is complete.

In order to operate this cordless snow shovel you will need 

a iON+ 24V System battery and charger. See page 14 for 

battery and charger options and specifications, or for more 

information visit snowjoe.com.

CORE TOOL

B CHARGER SOLD SEPARATELY

Fig. 1

Push lock button

Fig. 2

Battery pack

24VCHRG-QC 

quick charger  

(Sold separately) 

red

Charging

green

Fully 

Charged

Fig. 3

Battery pack

24VCHRG-DPC  

dual port charger 

(Sold separately)

red

Charging

green

Fully 

Charged

Summary of Contents for 24V-SS11-CT

















Reviews: