Lit. No. 70692, Rev. 01
11
October 1, 2018
ATTACHING TO UTV OR PICK-UP TRUCK
NOTE: Periodically throughout the snow and ice
control season, verify that mounting devices
are secure.
If using a TPR-020/TPR-020-1 Receiver Adapter,
attach the hitch adapter plate to the spreader frame in
accordance with the adapter's Installation Instructions.
Insert the hitch into the vehicle receiver. Lock with the
hitch pin and cotter pin that are included with the adapter.
Plug the spreader harness into the vehicle plug. The
equipment is ready to begin spreading.
MOUNTING THE SPREADER
CAUTION
Before lifting, verify that the hopper is empty
of material. The lifting device must be able to
support the spreader's weight as shown in
the spreader speci
fi
cations table.
ATTACHING TO TRACTOR
To attach the spreader to a tractor's 3-point hitch,
attach the hitch in accordance with the kit's Installation
Instructions. Back the tractor up to the spreader
frame. Lower the hitch and attach to the spreader.
Plug the harnesses together. Once attached, raise the
spreader 12" to 18" above the ground.
The equipment is ready to begin spreading.
Receiver Adapter w/
Precision Pro 1675 spreader installed on truck.
Hitch
View of
attachment
points.
Adjust top link so that spreader is vertical.
