Lit. No. 74419, Rev. 01
13
November 1, 2017
SPRAYER OPERATION
1. Be sure that the pump switch is in the
"OFF" position.
2. Fill the sprayer with liquid through the port on the
top of the tank.
3. Select the desired application method by turning
the valve handle toward the appropriate icon:
4. When ready to spray, turn the pump switch to the
"ON" position. When done spraying, be sure to
turn the pump switch to the "OFF" position.
5. Charge the battery after each use. Disconnect
the harness and connect the battery charger as
shown below. Then plug the charger into a
110 Volt outlet.
Turn toward the wand icon to use the spray wand.
Turn toward the spray icon to use
the front spray nozzle.
ASSEMBLY & OPERATING THE SPRAYER
6. Install the included spray nozzle to the nozzle
body.
