Lit. No. 43828, Rev. 02
23
January 15, 2019
TROUBLESHOOTING
Material free
fl
ows.
Material
fl
ows too slowly.
Increase auger
speed.
Material issue.
Check baf
fl
e
length.
Check baf
fl
e
position.
Turn on vibrator.
18" correct length
Should touch
hopper on 3 sides.
Material issue.
Material issue.
Material does not
fl
ow.
Material
obstruction.
Auger runs
backward.
Turn on vibrator.
Remove
obstruction.
Run 12V to auger
circuit on spreader
power cord.
Material issue.
Auger runs
proper direction.
Replace vehicle
harness.
Material Flow Issues
Auger runs
backward.
Check connections
at auger motor for
reverse polarity.
Polarity correct;
replace spreader
harness.
