![background image](http://html1.mh-extra.com/html/snowdogg/mut-series/mut-series_owners-manual_1309759013.webp)
16992210 Rev A
13
CONTROLLER FUNCTION
After hitting POWER, the SnowDogg logo should be
lit and the controller status light (upper right corner)
should be solid GREEN. If the status light is blinking,
see troubleshooting.
Lift Button
Plow lifts until lift cylinder is at end of stroke and fluid
is diverted over the main relief valve at 1900PSI.
Right Button
Plow right side moves towards the truck. At the end
of stroke, fluid is diverted over the main relief valve at
1900 PSI.
Left Button
Plow left side moves towards the truck. At end of
stroke, fluid is diverted over the main relief valve at
1900 PSI.
Lower Button
Plow drops until the blade hits the ground or until the
cylinder is fully retracted.
Float
(hold Lower Button for >.5 seconds)
Float light is lit and plow drops until the blade hits the
ground or until the cylinder is fully retracted – and the
drop valve remains energized allowing the blade to
follow the ground (depending on how the chain is set).
MOTOR SA
SB
SC
LIFT
1 - 1 -
LOWER
-
1
-
-
FLOAT
-
1
-
-
LEFT
1
-
-
-
RIGHT
1
-
-
1
LOGIC TABLE
NOTE
Full schematics and pin out information can be
found online at www.snowdoggplows.com under
Tech Support in the 16992910 service manual.