SNOWDOG Twin Track V14 MER, Manual

Page: 3 / 20

3
1� Handlebar
2� Air filter
3� Headlight
4� Muffler
5� Fuel tank
6� Hood
7� Track
8� Front mud flap
9� CVT pulley
10� Hitch
11� Engine
12� Engine security kill switch
13� Rear mud flap
14� Reverse shift lever
15� Hood fastener
16� Axle bearing
17� Trolley wheel
18� Track support wheel
19� Sliders
20� Track tensioner
5.4 Basic controls
1� Handle grip
2� Parking brake lever
3� Engine security kill switch
4� Handle switch assembly
5� Reverse shift lever
6� DC outlet
7� Choke lever
8� Parking brake
5.5 Handle switch assembly
1� Electric starter button (1) �
When this button is pressed the electric starter is working
and the engine can be started� Do not hold the button
pressed for more than 10 seconds�
5
6 7
1
2 3
4
1
8
3 2
1
2� Headlight switch (2) �
When the switch is in position , the handle heater, the
headlight and the DC outlet are working�
When switch is in position , the light and the DC outlet
are working�
When switch is in position , the handle heater, and the
light are off� The DC outlet is working�
!
Warning
Do not switch on the headlight if the battery
is not connected!
3� Ignition on/off switch�
When the switch (3) is in position (toward the operator),
the ignition is on� The engine can be started�
When the switch (3) is in position (away from the
operator), the ignition is off� The engine cannot be started�
5.6 Fuel lock
The fuel lock is located under the fuel tank�
To close the fuel lock, shift the lever at STOP position�
To open the fuel lock, shift the lever from STOP position�
!
Warning
If you store and transport the Snowdog with an
open fuel lock, the fuel will get into the crankcase
and mix with the oil.
5.7 Engine security kill switch
There is an engine emergency kill switch on the handlebar,
it consists of the button and the safety pin�