Snow Stage Ellipsoidal, User Manual

Page: 12 / 18

SETTING
DIM3
DIM1
DIM2
O F F
DIMMER DIM4
PWM_RATE
FULL POWER CCT
BLACK
SAVE
DMX ERROR
UPLOAD
RESET
SEND ****
****
RESET
****
600HZ
1200HZ
2000HZ
2400HZ
6000HZ
25000HZ
STUDIO
LIVE PERFORMANCE
POWER
3200K
4200K
5600K
10000K
NORMAL
XY OFFSET
HIDE
X FINE
Y FINE
± 200
± 200
SHOW
8 11
1
2
3
4
7
NO FUNCTION
STROBE FROM SLOW TO FAST 0-25Hz
NO FUNCTION
THUNDER STROBE
NO FUNCTION
RANDOM SROBE
179
STROBE
5
6
MASTER DIMMER
RED
GREEN
BLUE
AMBER
LIME
NO FUNCTION
LIVE
STUDIO
POWER
NO FUNCTION
FAN CONTROL
8
240
3.8 SPECIAL SETTINGS
●
[SETTING]...this menu allows the user to adjust key operation settings for this fixture.
●
Select[UPLOAD] to upload the custom programs from the current MASTER unit to the
SLAVE units.
●
In order to reset custom modes to default values select [RESET] .
Note: [UC]\[RGBW]\[CALIB.C] can
’
t reset
●
[ COLOR ] is for activate/unactivate the color calibration functions. When [ RGBW ] is
selected, on RGB = 255,255,255, the color is displayed as calibrated
in CALIB.C -- RGBW. When[
COLOR ] is set [ OFF ] , on RGB = 255,255,255, the
RGBvalues are not adjusted and the output is most powerful.When [ UC ] is
selected, the RGB output are adjusted to a standard preset universal color which
balances fixtures from different generations.
Note: [COLOR]work only when choose [NORMAL]at [FULL POWER CCT]
●
Select [DIM1], [DIM2], [DIM3] or [DIM4] for different dimming speeds. ([DIM4]is the
slowest dimming speed)
●
Select[SEND] to upload the custom programs from the current MASTER unit to the
SLAVE units.
●
[DMX ERROR] Choose[SAVE] in order to save the last DMX data incase of DMX
signal error.Choose[BLACK] in order to blackout in case of DMX signal error.
●
< > PERFORMANCE ...this setting allows the user to select the performance
characteristics of the fixture.
●
<PWM_RATE> is PWM reflesh rate bottom, press UP/DOWN to choose <600Hz>
、
<1200Hz>
、
<2000Hz>
、
<2400Hz>
、
<6000Hz>
、
<25000Hz>
Note: with reflesh rate increased, gray rate of dimmer will be reduced, (that's means
high reflesh rate, low gray rate), when it's <4000Hz>,CV3 is invalid, when it's
<25000Hz>,CV1 CV2 CV3 are invalid, so please lower PWM rate to increase gray rate
in necessary.
●
<FULL POWER CCT> is the color temperature choose bottom, press UP/DOWN to
choose, under full power, <3200K>
、
<4200K>
、
<5600K>
、
<10000K> can be
chosen, when choose <COLOR>, <3200K>
、
<4200K>
、
<5600K>
、
<10000K> are not
work, but choose <NORMAL>.
CHANNEL FUNCTION VALUE