Snow Peak FES-195, Product Manual

Page: 28 / 32

●Before storage, the product should be cleaned and dried sufficiently. ●If you remove the building tape after
setting up, connect the Y-shaped and I-shaped buckles of the building tape before taking it down. This will make it
easier to position the pegs for the next time you set up. *If you peg down the Y or I-shaped part from the outside
of the main body, the main body will expand, and it will be difficult to re-set the pegs when you take it down. ●
When removing the pole from the pins, the pole may recoil. Use your hands to keep the pole steady until it
straightens. ●When removing the pole from the sleeve, push it out. *If the pole is pulled out, then it may become
disconnected inside the sleeve. The disconnection of the pole inside the sleeve may cause damage to the cloth.
●Fold the pole from the center to the edges. If folded
from the edge, the cord can be overstretched, which
may cause elongation or breakage. ●Pull out all pegs,
clean them and store them in the peg case with their
heads facing down.
27
■ Precautions for disassembly / storage
■ How to store the shelter in the carry bag
(When storing, be sure to remove the inner tent from the main body before removing the main body.)
② Fold the sides inward to form a rectangle.
①
Fold the main body in half with the center sleeve as centered on top.