Snow Peak FES-091, Manual

Page: 27 / 28

26
●
When using a product that has not been used for a long time, check the product and its contents careful-
ly. If you have any questions, please contact Snow Peak Customer Service.
●
A combination of polyester fabric is used for this product. Taking the material characteristics into consid-
eration, we adopted processing and color patterns that will result in less color migration. However,
depending on storage conditions, slight color migration may still occur. Do not store the product while it
is wet to prevent this color migration.
●
Before storage, the product should be cleaned and dried sufficiently. If the product is stored when wet,
the build-up of mold, bad odors, color migration, and material deterioration will occur. Dry the product
sufficiently in a breezy and shaded area and clean the surface with a soft brush before storing.
●
Do not turn the product upside down with the poles through it. Doing so may result in pole breakage or
fabric damage.
●
Clean and dry the surface of the poles before storing. If stored when wet, corrosion may occur, resulting
in strength deterioration. Keep the joints clean and apply a small amount of silicone lubricant; applying
an excessive amount of lubricant will stain the cloth. Ensure that the cords inside the poles are not pulled
unnecessarily.
●
When storing the poles, please fold them from the center
outwards.(Figure A)
●
Store the product in a well-ventilated area, away from
heat and moisture.
●
Using the zipper when it is covered with mud, sand or dust may cause wear or damage.
Clean the zipper with a brush before use. Apply small amounts of silicone lubricant to the fastener regularly
to allow for smooth movement. Do not apply excessive amounts of lubricant as it will leave stains on the
cloth.
●
Slight damage to the cloth can be mended with repair tape that can be purchased from your local outdoor
gear retailer. Refer to the product instructions for the correct use of such repair tape.
●
Depending on the conditions during use, the tent material may deteriorate over a wide area, losing its
durability and becoming irreparable.
●
Seam tape is pressure-capped at a temperature setting that prevents damage to the PU coating. Howev-
er, it may peel off as it is used repeatedly. If peeling is found, set iron at a low temperature and reattach
only the peeling sections. Be aware that excessive heat will discolor or accelerate the deterioration of the
fabric. If the PU coating is completely peeled off, it may be impossible to repair.
●
Sap cannot be easily removed. Do not set up this product under trees that frequently drop sap. The fabric
or coating may be permanently damaged if the sap is forcibly removed with a solvent, etc.
If the Pole is broken while the tent is in use, as an emergency treatment, use a repair pipe or splint, and fix
it with vinyl tape. Or disassemble the tent for repair.
●
To maximize the longevity of this product, regularly check and maintain the product as described above.
Maintenance
(Figure A)