Specifications
Contents Included (Name of Parts)
Thank you for purchasing a Snow Peak product. This is a folding bench, designed for two people. Please read this instruction manual before using and keep this
instruction manual in a safe place for future reference. Please confirm all components and set up instructions before using. If you are not clear on any point,
contact your local Snow Peak Dealer before using.
MADE IN CHINA
Safety Precautions: Read the following instructions thoroughly to ensure safe and proper usage.
Warning / Misuse could result in serious injury or death to the user.
Caution / Indicates actions which may lead to injury, damage to this product, or damage to other items.
●Place the chair on stable ground and not on a slope or uneven surfaces.
●Put cloth or felt on the bottom of the chair frame when using it on the floor or lay down a Tatami to prevent damage to surfaces.
●Be careful not to pinch your fingers on the frames during set up, and always open and close the legs slowly.
●Do not sit on the chair in an irregular manner, such as sitting on the edge of the seat. Do not use this product for any purpose other than sitting.
●Do not sit down roughly and do not shake the chair. Doing so may warp or damage the chair.
●Children should only use this product with adult supervision. Failure to do so may result in an unexpected accident or injury.
●The chair material is not fire-resistant. Use caution when sitting near an open flame.
●The product is not for permanent use.
●Stow the bench in a location that is dry and moderate in temperature.
●The aluminum pipe of LV-071-BBR is silver anodized (oxide film) processed. Scratching may expose the base metal.
●Metal fittings on bags and clothes may get caught in the fabric. Be careful when using objects with sharp tips or metal fittings.
●Due to the characteristics of the fabric, please note that fluffing and pilling may occur on the surface of the seat cloth during use.
●Before using the product, inspect it to ensure there are no abnormalities in any of the parts. If any abnormalities are found, stop use immediately and contact the
dealer where the product was purchased or Snow Peak Customer Service for inspection or repair.
●Do not use this product near a heat source such as a gas-powered lantern, burner, or open flames. The heat source may cause deformation or damage.
●Do not attempt to adapt this product. Adaptation may cause it to lose its strength and performance.
Snow Peak guarantees its product against manufacturer defects. In the rare case you feel this product has a defect or needs repair, please contact the retailer where you purchased the
product or Snow Peak Customer Service. We will repair or replace the product free of charge if there is a manufacturing defect. In other cases, we will repair at an appropriate fee. The
decision of repair and replacement is at our discretion. Damages, as follows, are not covered under warranty:
1. Material deterioration caused by age. / 2. Damage caused by modifications or rough handling. / 3. Damage caused by improper use that does not follow the instruction manual. / 4.
Damage caused by unexpected accidents. / 5. Damage not caused by defects in the manufacturing process. / 6. Damage caused by dust or rust. / 7. Damage or defects caused when
dismantling the product. / 8. Damage and defects caused by dropping or other shocks to the product. / 9. Deterioration or failure of parts due to friction. / 10. Damage caused by improper
use with other maker’s products.
Warranty
●For repairs, please contact the retailer where you purchased the product or Snow Peak Customer Service.
●When you ask for repair, please make sure that the product is dry and clean.
●Please attach a memo or some kind of tag indicating the needed repair and also please write details of when and how the damaged occurred.
●Shipping cost and fee for the repair will be determined as follows.
1. Within warranty: Return shipping cost and repair fee will be covered by Snow Peak.
2. Outside warranty: Return shipping cost and repair fee will be covered by the user.
Repair
Maintenance
Seat Cloth
Frame
Instruction Manual
(This Manual)
Folding Bench BYBORRE INSIDE
LV-071-BBR
●Material: Frame / Aluminum Alloy, Polyethylene,
Synthetic Rubber
Seat / Polyester, Wool, PES, Polyamide
●Size: 1,095 (43.1”) x330 (13”) x360(14.2”) (h)mm
●Stowed: 1,095(43.1”) x65 (2.6”) x470 (18.5”) mm
●Weight: 2.4kg (5.3lbs)
●If this product is not used for long periods, contact your local Snow Peak Dealer for inspection before using.
●To remove stains on the seat cloth, wipe out with cloth soaked in detergent (do not wash).
●Dry in a shaded, well-ventilated area.
●Please store this product in a well-ventilated area away from high temperatures and humidity.
Snow Peak, Inc.
456, Nakanohara, Sanjo-Shi, Niigata 955-0147 Japan
Tel. +81 256-46-5858 Fax. +81 256-46-5860
www.snowpeak.co.jp
Snow Peak USA, Inc.
404 NW 23rd Avenue, Portland, Oregon 97210, USA
Tel. +1 (503) 461-0781 Instagram. @snowpeakusa
www.snowpeak.com Email. [email protected]
Instruction Manual : Ver 1.00
