Chapter 11 – Emergency Operation
38
TL37J – 511116-000-EN-A
Danger
If the emergency lower is used due to a machine
defect, do not use the machine. Contact your local
Snorkel representative.
Warning
If the emergency lower is used, the top and bottom
booms must be fully extended then fully lowered
before work can continue.
After emergency lowering, any further powered
lowering could cause an airlock in the hydraulic
system. This could cause the hydraulic operation
to fail.
All booms must be fully extended/raised, then low
-
ered before work can recommence.
Emergency Lowering Hand Pump
The emergency hand pump lowering procedure is
available from the upper control station. In the event
of a power failure, the hand pump procedure to use is
as follows:
• Insert the hand pump into the pump shaft.
• Move the platform raise/lower levers to the required
direction of movement and operate the hand pump.
• Continue pressing down on the platform raise/lower
levers when the machine starts to lower.
Hand Pump
Platform
Raise/Lower
Levers
Figure 11.3 – Hand Pump Emergency Lowering
Procedure
Summary of Contents for TL37
