![background image](http://html1.mh-extra.com/html/snorkel/sr1054/sr1054_operator-and-maintenance-manual_1309590131.webp)
131
Model: Snorkel SR9244 SR1054
Part Number: 159-0037-000
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
CHECKING THE HYDRAULIC OIL LEVEL
5.14
Regularly check the level of hydraulic oil in the tank at the right rear part. Open the engine compartment
and the indicator on the storage tank is seen. The hydraulic oil must be topped up when the float is below
the minimum level. An indicator in the cabin
display indicates this.
Attention: operating the machine with an
amount of hydraulic oil below the limit value
may seriously damage the machine and its
components. Only use hydraulic oil
recommended by the manufacturer.
CHANGING THE HYDRAULIC OIL
5.15
This operation must be carried out by qualified personnel.
To change the hydraulic oil in tank version A, you must:
1.
Remove the lower closing sheet of the engine compartment.
2.
Place a container (with approximate capacity of 200 litres) under the drain plug (1).
3.
Unscrew the oil tank cap (2).
4.
Wait for all the oil to drain.
5.
Screw the drain plug (1).
6.
Remove and replace the immersed hydraulic oil filter in intake (3) (you must insert your hand into
the tank through the hole where the oil filter is installed in return (4) after having removed it).
7.
Fill the hydraulic oil tank according to the specifications.
8.
Screw back the oil tank filler plug (2).