rubber gloves, and protective clothing when
working around batteries.
If acid contacts your eyes, flush immediately
with clear water and get medical attention. If
a c i d c o n t a c t s y o u r s k i n , w a s h o f f
immediately with clear water.
■
Safety Decals and Placards
There are various safety de cals and plac ards on
the EPV.
Be sure that all the safety decals and
placards on the EPV Series are legible. Clean
or replace them if you cannot read the words
or see the pictures. Clean with soap & water
and a soft cloth. Do not use solvents.
You MUST re place a de cal or plac ard if it is dam -
aged, miss ing, or can not be read. If it is on a part
that is re placed, make sure a new de cal or plac ard
is in stalled on the re placed part. See your Snor kel
dealer for new de cals and placards.
Typically, the majority of EPV machines are
destined for the overseas market and leave
the factory as a built up subframe only unit.
Final assembly, construction of the deck
and mounting on a truck chassis is carried
out ex-factory.
The decals are provided as a kit with the
machine and placement of these decals is
the responsibility of the business involved
in mounting the subframe on the truck
chassis. They should also provide you with a
plan of the decal placement.
NOTE:
The following page shows the SAFETY decals
most commonly used on the EPV although not
their positions on the machine.
EPV Series – 1596(A)
Rev A
page 1 - 5
1. Safety
CAUTION
CAUTION
IMPORTANT
Summary of Contents for EPV Series
