
10
9
Getting Started
Getting Started
Removing Back Cover
SIM Card Installation
Battery Installation
1.
Removing the back of the ez4G can be done by locating the slit on the left side of your device.
You can use your finger or a tool, such as a paper clip, by inserting into the slit and turning clockwise.
2.
The back will then pop up. You'll then need to work your fingers around the device to fully remove
the back cover.
3.
Once the back is removed you'll be able to access the Battery, SIM Slot, and MICRO SD slot.
A.
B.
1.
Insert battery with Logo side up and gold contacts facing down into the compartment at an angle.
2.
Press top of battery down until flat into the compartment.
1.
Position SIM by following the visual diagram next to the SIM Tray and with LOGO side up.
2.
Slide SIM into place following the arrow until fully inserted.
A.
B.
A.
B.
C.
Summary of Contents for ez4G
Page 1: ...User Manual V2 0 EN ez4G...