30
31
Press any button to stop seeking.
Seeking will stop automatically when seek an available channel then play this station.
The unit will stop on the beginning frequency if no available station after seeking one
cycle.
Hold on pressing [>] / [<] buttons of remote control to perform same operation.
10. BAND
Touch the icon to switch the FM/AM wave band as following:
FM1 - FM2 - FM3 - AM1- AM2 - FM1
Press the [BAND] button of panel or remote control to perform same operation.
11. NEXT PAgE
Touch the icon to enter the 2nd page of RADIO Mode:
1. DOWN / 2. UP
Touch the icons to adjust the frequency downward / upward by step decreasing /
increasing.
Hold on touching the icons has same function than [SEEK-] / [SEEK+].
Press the [<] / [>] buttons of remote control to perform same operation.
3. LOCAL: ON / OFF
Touch this icon to activate/deactivate the AF function.
When you are using the local searching function of LOCAL, you can only receive the
radio station with strong enough signals and fine state.
4. NEXT PAgE
Touch the icon to enter the 3rd page of RADIO Mode:
1. ASM (Auto Store Mode)
Automatically seek and store stations
Hold on touching the icon to start seeking stations with the strongest signal from the
lowest frequency point in the entire wave bands; press any button to stop seeking.
After seeking, the former stored stations will be instead.
Store the received effective radio frequency to the six stored channels M1~M6.
The unit will play the stations one by one for few seconds; press any button to stop
1.
playing.
It is independent for FM & AM frequency. There are 3 wave bands of FM1-FM2-FM3
2.
& 2 wave bands of AM1-AM2, each can store 6 radio stations, totally 30 stations can
be stored.
The unit will stop on the beginning frequency if no available station after seeking
3.
one cycle.
Press the [AST] button of panel or hold on pressing the [PBC/AST] button of
4.
remote control to perform same operation.
2. AF (Alternative Frequency)
Touch this icon to activate the AF function. The detailed introduction refers to Radio
Data System Operation (RDS) in next page.
