10
snom technology AG
[ F
R E Q U E N T L Y
A
S K E D
Q
U E S T I O N
]
Confi guring snom phones for Mass Deployment V3.4
11
[ F
R E Q U E N T L Y
A
S K E D
Q
U E S T I O N
]
challenge_reboot
V
alid values: <true>, <false>
Default: false
Description: This setting enables/disables
a challenge response for remote reboot
request.
challenge_checksync
Valid values: <true>, <false>
Default: false
Description: Turning this setting on
<true> enables a challenge response for
Check-Sync
.
H.323 Settings
user_h323_e164_number1
Valid values: e.g. <3884576>
Default: Blank
Description: E164 number assigned to
the phone.
user_h323_id1
Valid values: e.g. <kitchen>
Default: blank
Description: H.323 ID assigned to the
phone.
user_h323_url_id1
V
alid values: e.g. [email protected]
Default: blank
Description: H.323 URL ID assigned to
the phone.
user_gkgw_mode1
V
alid values: <auto>, <gatekeeper>,
<gateway>, <none>
Default: auto
Description: Gatekeeper or gateway mode.
Can be <auto> (automatic discovery
of Gatekeeper) or <gatekeeper> for
explicitly using the gatekeeper mode,
<gateway> for gateway mode and
<none> for aut
onomous operation.
user_h323_gateway1
V
alid values: e.g. <192.168.0.9>,
<gtk.company.de>
Default: blank
Description: IP address of the gatekeeper
or the gateway, depending on gkgw_
mode (see above). This field will be
automatically set to the discovered
gatekeeper‘s IP Address if <auto> mode
is select
ed in “gkgw_mode”.
user_h323_ttl1
Valid values: e.g. <600>
Default: 600
Description: Time-to-live for Gatekeeper
registration. Very low values result in
more frequent refreshes of registration
but also cause additional network traffic.
Very high values result in large intervals
of disconnection from the Gatekeeper
before getting back online if the
gatekeeper reboots without sending any
un-re
gistration request to the phone.
user_early_start1
Valid values: <true>, <false>
Default: true
Description: The early start option
allows the H.245 channel to be set up
earlier, and hence speeds up the call
setup. When early start is turned on, the
H.245 channel address is also supplied
in the Setup message. This speeds up
the call because
the H.245 channel
negotiations can proceed in parallel
to H.225.
user_fast_start1
Valid values: <true>, <false>
Default: false
Description: Fast start sends encoded
OpenLogicalChannel messages within the
Setup messages and hence eliminates
the need for a separate H.245 channel
for Codec capability negotiation. This
