Snom 100, User Manual

Page: 9 / 92

9
Cleaning
To clean the snom 100 use a slightly moist and anti-
static cloth. Please try to avoid cleaning liquids since
they might damage the surface or internal electronics
of the phone.
Connecting the phone
First connect one end of the handset cable to handset
and then to the jack on the left side of the phone (see
illustration).
Now, plug in the Ethernet (network) cable into the
RJ45 connector on the rear side of the phone as
shown below and the other end into the network side
to establish a data link.
In case you are using an external power supply,
please insert the plug of the power supply into the
connector next to the data line and hook up the casing
into the mains.