Snom 00004390 User Manual Download Page 21 | Manualshive

Page: 21 / 126

background image

21

D335 User Manual

Getting to Know Your Phone

H

ard keys

Context-sensitive, programmable function keys

These function keys can be programmed on the

Function Keys

page of the phone's web interface with

a number of key events; these functions will then be available when the phone is in idle mode. For
more information, see

"Configuring the function keys" on page 69

. For the factory default settings,

see "At a glance" on page 18.

You cannot change the functions that are available when the phone is active, e.g., when you are in a

call, when the phone is ringing, etc. Depending on the activity, different functions will be available.

Navigation, confirmation, and cancel keys

can be programmed with the key events available in their drop-down menus. See

"Configuring the

function keys" on page 69 for further information. Factory settings:

Navigation key

• On idle screen: Press to select identity for outgoing calls
• In other contexts: Moving up and down lists one item/button at a time

•

In text fields, press to move the cursor to the left one character at a time.

• On idle screen, press to open list of missed calls.

•

In text fields, press to move the cursor to the right one character at a time.

• On idle screen, press to open the list of received calls

• Press to accept calls on speakerphone and in headset mode.
•

Press to confirm actions/settings and return to preceding screen.

• On idle screen: Redial.

• Press to terminate calls on speakerphone and in headset and handset modes.
• Press to cancel actions and return to preceding screen.

Preprogrammed, variably programmable function keys

The factory setting is printed on the respective key. Other functionalities can be programmed onto
them. See

"Configuring the function keys" on page 69

for more information.

Page key for SmartKeys. Press the key to put the next "page" of four label "pages" on
screen.
Message key.  The LED on the key is lit when a new message is waiting on the mailbox.
Press the key to retrieve messages.

In "do not disturb" (DND) mode incoming calls do not ring; callers hear the busy signal.
If there is an active setting for call forwarding on busy, incoming calls will be forwarded

to the number specified in the setting (see

"Call forwarding" on page 66).

Exception

:

Calls from phone numbers on your directory's VIP list (see "Contact Types" on page
40) will ring on your phone.

Press the key to turn the function on and off for all identities registered on the phone

(Fig. 1). If you want to turn on DND for one or more, but not all of the identities (Fig. 2 and
3), use the identity settings on the phone's web user interface.

«
...
19
20
21
22
23
...
»

Summary of Contents for 00004390































































































































Reviews:

No comments

Related manuals for 00004390

Brand: 8*8 Pages: 5

Univerge SV 9500

Brand: NEC Pages: 2

Brand: Samsung Pages: 23

GALAXY S8 ACTIVE

Brand: Samsung Pages: 12

Galaxy S5 Sport

Brand: Samsung Pages: 30

Brand: Samsung Pages: 23

Brand: Samsung Pages: 58

Brand: Samsung Pages: 2

Brand: Samsung Pages: 18

Brand: Samsung Pages: 80

Galaxy S Vibrant

Brand: Samsung Pages: 193

Brand: Samsung Pages: 44

Brand: Samsung Pages: 12

Brand: Samsung Pages: 40

Brand: Samsung Pages: 22

Brand: Samsung Pages: 114

Brand: Samsung Pages: 4

Brand: Samsung Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands