background image

2 of 18

 

► Do not attempt to operate this Spreader until you have read and understand all warnings and instructions

 

     in the Owner’s manual and on Spreader unit. 

Failure to read and follow all warnings and instructions 

 

     may lead to serious injuries or death.

 

► For your safety, warning and information decals have been affixed to this product to remind all

 

     operators of safety precautions. If decals are marked, damaged or destroyed, replace with new decals 

 

     ordered from Curtis Industries, LLC.

IMPORTANT:

 Before you Start...

 

1. Most accidents are preventable and caused by human error.

 

    Exercise care and precautions to prevent the possibility of injury to operator or to others.

 

2. Before working with the Spreader, secure all loose fitting clothing and unrestrained hair.

 

3. Always wear safety glasses with side shields when working metal against metal. Failure to do

 

    so could result in serious injury to the eyes.

 

4. Never allow children to operate or climb on equipment.

 

5. Never attempt to adjust or service Spreader while engine is running.

 

6. Never attempt to un-jam Conveyor Chain while engine is running.

 

7. Do not stand behind Material Chute while Spreader is discharging.

 

8. Do not refuel a hot engine. Allow time to cool before refueling.

 

9. Never weld or grind on equipment without having a fire extinguisher available.

 

10. Always inspect unit for defects: Broken, worn or bent parts, weakened areas on Spreader or 

 

      Mount.

 

11. Always shut off vehicle and power source before attempting to attach or detach or service 

 

     Spreader unit. Be sure vehicle/power source is properly braked or chocked.

 

12. Always make sure personnel are clear of areas of danger when using equipment.

 

13. Always keep hands, feet, and clothing away from power-driven parts.

 

14. Remember, it is the owner’s responsibility to communicate information on safe usage and 

 

      proper maintenance of all equipment.

 

  NEVER enter Hopper Box while Conveyor Chain is moving.

 

  DO NOT RIDE on any part of the Spreader while vehicle is in motion.

 

■  Disconnect & lock out Power source before adjusting or servicing.

DANGER

WARNING

 

 

 

 

 

   MOVING PART HAZARD

 

 

 

 

 

         TO AVOID INJURY

Summary of Contents for Fast-Cast 550 series



















Reviews: