Vega-MV Router Multiviewer - User Manual
Issue 1 Revision 2
Page 182
© 2017 SAM
Configuring Each Multiviewer Input with a Router Controller
Connection to Other Equipment 9.9
For example,
multiviewer input 1 (MV Input 1 on the tab) can be set up to get video tally information from a
certain router controller. See Figure 141.
All ‘Connected’ (ticked) MV Inputs will have the UMD on their multiviewer tile show the name
of the source signal monitored on the tile and any tally information shown. A combination of
controllers is possible.
Matrix Number
Matrix number of the router controlled by the selected
controller.
Matrix Level
Matrix level of source signal in router.
Router Destination
Router destination that is physically connected to the MV Input.
Destination Association
Normally the same as Router Destination.
Connected
Check box.
Tick if the MV Input is connected to the router controlled by the
selected router controller.
Figure 141 ‘Video Router’ Tab Controller Selection
Column Item
Description
Table 70
Columns of ‘Video Router’ Tab (Continued)