background image

7

L I S T E N I N G   L E V E L S   A N D  
P O W E R   H A N D L I N G

The power recommendation for the system assumes you
will operate the amplifier in a way that will not produce
distortion. All speakers can be damaged by a modest
amplifier if it is producing distortion. If you hear a gritty
noise or other signs of strain, turn down the volume.
Prolonged or repeated operation of your speakers with a
distorted signal can cause damage that is not covered by
the warranty. 

H O W   T O   C A R E   F O R  
Y O U R   S R . 5 ’ S

Cabinet

Your speaker system has been hand-sanded and finished
with either a black or white paint. 

fi

Use a soft terry cloth towel slightly dampened
with water or a mild detergent. The towel should
be just damp enough to wipe the surface clean
without leaving a trail of moisture.

fi

Do not use abrasive cleaners or any cleaner con-
taining chemicals harsher than those found in
glass cleaner. 

Grille Cloth

fi

You can remove the grilles from the speaker sys-
tem and gently vacuum to remove dust.

When ceiling mounting, follow the same installation 
procedures as previously outlined.

Place felt bumpers on
back of the SR.5 to
protect your ceiling.

Summary of Contents for SR.5 Surround









Reviews: