7
FROM PREAMP
Receiver
PS.10mk2 Amplifier Panel
SUB
OUT
L
R
TO AMP
L
R
LOW LEVEL IN
HIGH PASS OUT
L I N E L E V E L W I R I N G
Using the Subwoofer out connection
1. Connect a single RCA Cable from the “SUBWOOFER OUT” on your processor to either the Left or Right
input on the PS.10mk2.
4
If you want to use the crossover point determined by your surround electronics, set the PS.10mk2
crossover to ”EXT“ (External).
4
If you want the PS.10mk2 to cross over lower than determined by your surround electronics, select a
lower setting on the PS.10mk2 crossover.
FROM PREAMP
Receiver
PS.10mk2 Amplifier Panel
L
R
AMP
IN
PREAMP
OUT
L
R
TO AMP
L
R
LOW LEVEL IN
HIGH PASS OUT
Using the PS.10mk2 ‘s internal high-pass filter
1. Use the line-level RCA inputs, connecting to ”PREAMP OUT“ on your receiver.
2. From the PS.10mk2 line-level out, connect to ”AMPLIFIER IN“ on your receiver.
3. Choose a setting for the PS.10mk2 crossover that allows the subwoofer to blend seamlessly with the
main speakers.
The high-pass filter is fixed at 80Hz for the main speakers and has a 12 dB/octave rolloff.
