Snell PS.10, Owner'S Manual, Page: 7 / 12

7
L I N E L E V E L W I R I N G
When using the speaker-level inputs, the main speakers will be receiving the full frequency range.
Using the Subwoofer out connection
1. Connect a single RCA Cable from the “SUBWOOFER OUT” on your processor to either the Left or Right
input on the PS.10.
fi
If you want to use the crossover point determined by your surround electronics, set the PS.10 crossover
to ”EXTERNAL“.
fi
If you want the PS.10 to cross over lower than determined by your surround electronics, select a lower
setting on the PS.10 crossover.
Using the PS.10‘s internal high-pass filter
1. Use the line-level RCA inputs, connecting to ”PREAMP OUT“ on your receiver.
2. From the PS.10 line-level out, connect to ”AMPLIFIER IN“ on your receiver.
3. Choose a setting for the PS.10 crossover that allows the subwoofer to blend seamlessly with the main
speakers.
The high-pass filter is fixed at 80Hz for the main speakers and has a 12/dB rolloff.