IQSDA34
www.snellgroup.com
Controlling the IQSDA34 from the RollCall Control Panel
Issue 2 Rev 3
Page 14
©
2015 Snell Limited
5.2 Channels
The Channels screen enables the input type and signal routing to be specified.
5.2.1 SDI Rate
•
Auto:
When selected, the unit will automatically detect and reclock any valid input
signal, and the detected rate will be displayed in the Unit Status.
If anything else is detected, the output will not be reclocked. If the On
Input Loss /
Mute
option is selected, the output will be muted; or, if the
On Input Loss / Pass
option is selected, the output will be passed through.
•
SD/DVB-ASI (270 Mb):
When selected, the unit will reclock only SD/DVB-ASI (270
Mb) signals.
When selected, the
On Input Loss
controls are greyed out and are inactive. If any
other standard is applied to the unit the output will be muted.
•
HD (1.5 Gb):
When selected, the unit will reclock only HD (1.5 Gb) signals.
When selected, the
On Input Loss
controls are greyed out and are inactive. If any
other standard is applied to the unit the output will be muted.
•
3G (3 Gb):
When selected, the unit will reclock only 3G (3 Gb) signals.
When selected, the
On Input Loss
controls are greyed out and are inactive. If any
other standard is applied to the unit the output will be muted.
•
Reclock Bypass:
When selected, the unit will not reclock the input signal. If a
supported rate is detected, the Unit Status will display the detected rate, otherwise, ***
will be displayed.
Note: When Bypass is selected the output drivers' slew rate will default to the faster
HD/3G mode.
