IQDEC02
N24
IQDEC02OPS 23/04/09
www.snellgroup.com
Version 1 Issue 7
N24.31
Genlock (continued)
Delay (625/525)
When these controls are used the output signal will
appear after the input signal with a time delay.
When not used the module will operate in the
synchronize mode.
Note that the H and V delay functions are only
active when the Lock to Input mode is selected.
H(orizontal) Delay (625/525)
This item allows the horizontal timing of the output
signal relative to the input signal to be adjusted by
up to 1 line in 1 pixel steps. The scrollbar will
adjust this value.
Selecting Preset returns the setting to the
minimum horizontal delay.
V(ertical) Delay
This item allows the vertical timing of the output
signal relative to the input signal to be adjusted, in
TV lines. The scrollbar will adjust this value. Range
is from 0 to 624 or 524 lines in 1 line steps.
Selecting Preset returns the setting to the
minimum vertical delay.
Video Delay Frames
The number of frames that the output signal will
appear after the input signal may be set with this
item.
Note that this function is available in any genlock
mode and will add to any other delay settings.
