background image

3

S P E C I F I C A T I O N S

Frequency Response (±3dB)  

23-200Hz; 20Hz at -6dB

Amplifier Power  

550 watts; BASH®

Crossover Low Pass for Subwoofer 

Variable from 50 to 150Hz

Crossover High Pass for Line Out  

Fixed at 80Hz, 12dB/octave

Bass Unit  

Dual 12-inch (305mm) long throw cast chassis woofers

Cabinet Construction 

Double-wall 3/4-inch MDF. Internal Double-H bracing.

Grille 

Black cloth covered grille

Controls 

Turn On switch with instant On and ten-minute Off delay, Phase Switch  

   

and Front mounted volume control

Dimensions (HxWxD, feet installed)  

30.75” x 17.5” x 21.75”  (78.1cm x 44.45 x 55.25cm) – positioned vertically 

   

19.25” x 29” x 21.75

 

”  (48.9cm x 44.45 x 55.25cm) – positioned horizontally 

   

(depth includes grille and amplifier fins,  

   

feet account for 1.75” / 4.44cm of height)

Weight  

113 lbs. (51.26kg)

Finish  

Black utility finish, hand-sanded, hand-painted 

Accessories 

4 cabinet feet

I N T R O D U C T I O N

We designed the ICS Sub 24 mk3 for maximum output 
and performance for today’s digital formats.  With bass 
extension to 20 Hz (-6dB), and output over 105 dB at an 
average listening position in a 3,000 cubic foot room, 
the ICS Sub 24 mk3 meets the demanding specifications 
of THX Ultra 2.

In addition to powerful and sophisticated electron-
ics and drivers, the ICS Sub 24 mk3 offers outstanding 
flexibility.  The cabinet has been designed to function in 
either a horizontal or vertical orientation and front-
mounted gain control provides easy access for subwoof-
er level adjustments.

Summary of Contents for ICS Sub 24 mk3













Reviews: