Vega 30 Router User Manual
Defining User-defined Sources
Vega 30 Web Interface 6.5
Issue1 Revision 1
Page 69
© 2017 SAM
2.
Click on an item in the drop-down list to select it, or continue typing in the table cell.
The “Audio 1” table cell entry is complete. See Figure 41.
Continue to add a further MADI input audio channel source:
3.
Click in the “Audio 2” column and enter ‘A.In 3D’.
A drop-down list appears to assist entry. See Figure 42.
4.
Continue to type the name, enter ‘-1’ and the drop-down list modifies. See Figure 43.
Figure 40 Drop-down ‘Auto-complete’ List
Some ‘auto-complete’ entry possibilities
Internal Test Tones and Silence audio sources
Figure 41 Audio Channel Source Entered
Figure 42 Drop-Down ‘Auto-complete’ List
Some possibilities
Internal Test Tones and Silence audio sources