Vega 30 Router User Manual
Routing Architecture
Product Overview 3.5
Issue1 Revision 1
Page 20
© 2017 SAM
3.5 Routing Architecture
The Vega 30 Router basically routes sources to destinations. The Vega 30 Router contains a
video crosspoint switch and an audio crosspoint switch, as shown in Figure 4.
The routing is carried out in a video crosspoint switch and an audio crosspoint switch.
The video crosspoint essentially routes Vega 30 video inputs to video outputs.
The audio crosspoint is located after the video crosspoint. The audio crosspoint routes
external MADI input audio and internal de-multiplexed audio channels to external MADI
outputs and internal audio ‘re-multiplex’ streams (for embedding into video outputs).
Router use cases are considered for the Vega 30 routing architecture in Section 10 "Routing
Use Cases" on page 171.
Sources and destinations are allocated numbers and names. There are 8-character and
32-character names, and default names are allocated. The names are editable via the unit’s
Web interface or via a RollCall template.
Figure 4 Vega 30 Routing Architecture
