MV-805 IP Multiviewer User Manual
Reset Template
RollCall Templates 6.9
Issue1 Revision 1
Page 76
© 2018 SAM
6.9 Reset Template
There are several ‘system resets’ which can be carried out from the RollCall templates:
From the System-Setup template:
The
System-Setup
template offers a “Service Reset”:
•
Service Reset
,
see Section 6.2.2 “System Reset box” on page 51.
This restarts the internal IP multiviewer software application of the MV-805.
From the Reset template:
Secondly,
this
Reset
Template
(see Figure 46) offers:
•
Restore Project
- This will revert the SAM Orbit IP multiviewer project on the MV-805
unit back to the default project that the unit was shipped with.
Click
Restore Project
.
•
Restart Multiviewer
- This will power cycle the MV-805 unit.
Click
Restart
.
•
Shutdown Multiviewer
- This will safely shut down the MV-805 IP multiviewer
software application, the internal operating system and shut down the unit itself.
Click
Shutdown
.
Figure 46 Reset Template
