MV-805 IP Multiviewer User Manual
Timer Control Template
RollCall Templates 6.5
Issue1 Revision 1
Page 66
© 2018 SAM
6.5 Timer Control Template
The
Timer Control
screen allows a user to control on-screen timer widgets on a multiviewer
video wall via a RollCall soft- or hard-panel. For example, to start/stop timers, or set them to
count up/down. There are up to 16 on-screen timers on the video walls from a MV-805 unit.
For each timer widget (Timer 1, Timer 2 ... Timer 16), the settings in Table 17 are available.
Figure 42 RollCall Timer Control Template
Setting
Description
Running
Check box.
Tick to start the timer. Untick to stop.
This is shown greyed out until a timer’s target time has been entered
(HH:MM:SS).
Reset
Check box.
Tick to reset the timer.
Note:
Once the timer has reset, then the tick disappears.
HH:MM:SS
Text box.
Enter the timer’s target time.
Target time format: HH:MM:SS, for example 02:30:00 .
Remember to press the
S
button to save the change.
Note:
When the target time is changed, the timer is reset.
Table 17
Timer Control Settings (per On-screen Timer Widget)
