LC2000/LC2000-IQ/LC4000/LC4000-IQ
System Setup Menus
Issue 1 Rev 6
Page 38
© 2015 SAM
7.3 Audio Routing
The Audio Routing menu enables you to set up the routing for the AES and analog outputs.
7.3.1 AES 1–4
•
AES 1–4:
Selects where to route the AES audio for each output.
7.3.2 Analog Group 1–2
•
Group 1–2:
Selects where to route the analog audio for each output group.
Note:
The AES and analog audio menus are only available if the CVBS option is fitted.
Note:
Only pairs 1–4 from can be routed to the AES output. Pairs 5–8 are not available on the
AES output.
Note:
Only groups 1–2 can be routed to the analog output groups. Pairs 5–8 are not available on
the analog output groups.
