LC2000/LC2000-IQ/LC4000/LC4000-IQ
Introduction
Issue 1 Rev 6
Page 20
© 2015 SAM
1.6.4 LC4000 & LC4000-IQ Audio Processing
Where two Dolby E options are fitted (LC4000/LC4000-IQ only), the first decode/transcode
path (Decode 1/Encode 1 in the block diagram) is only available as embedded audio on SDI
outputs A1 and A2, and can be routed to any AES or analog audio encoder. The second
decode/transcode path (Decode 2/Encode 2 in the block diagram) is only available as
embedded audio on SDI outputs B1 and B2, and can be routed to any AES or analog audio
encoder.
It is not possible to cross-route the Dolby option outputs. For example, you cannot embed
decoded Dolby D or E audio from the second decode/transcode path (Decode 2/Encode 2 in
the block diagram) to embedded audio on SDI outputs A1 and A2.
Note:
The LC4000-IQ unit does not have unbalanced AES inputs or outputs.
