LC2000/LC2000-IQ/LC4000/LC4000-IQ
RollCall Control Panel Channel Operation Screens
Issue 1 Rev 6
Page 116
© 2015 SAM
11.2.7 Scrolling Caption Generator
The Scrolling Caption Generator overlays a black text box with a user-defined caption onto
the output video. This is generally used as a setup or debug tool to help identify a video
stream on a monitor.
•
Caption Entry:
User-defined caption. To enter a caption:
In the Caption Entry field, enter the required text and click S to set. To return to the
preset value, click P (“Channel 1” is the preset caption).
Note: Text can be no more than 19 characters.
•
Caption Scroll:
Enables slow-speed horizontal scrolling of the caption within the
black text box. Scrolling is from right to left, and wraps around for continuous display.
•
Caption Enable:
The master enable – turns the caption display on and off.
11.2.8 Logo Control
Logo control enables static or animated graphics to be keyed on to the video output of a
channel.
Logo files are uploaded to the KudosPro unit using a SAM application.
The application is available for download under the “Support” tab at:
http://www.snellgroup.com/products/conversion-and-restoration/conversion/kudospro/
Logo Up-loader
To upload logos onto the LC2000/LC2000-IQ/LC4000/LC4000-IQ, run the logo upload
application on your PC. A dialog box will appear as shown below:
Enter the IP address of your unit and browse to the folder containing your required logos (see
section 7.7.1 and 10.6.1 for a summary of how to set the unit's IP address). Then click on the
Install Logo
button. This will upload the logo to your unit.
Once the logo file(s) have been uploaded to the KudosPro unit they will be automatically
displayed in the Logo Selection box.
Valid logo file requirements
:
•
A number of image file types are supported by KudosPro. For a full list of currently
supported image file types see the
Supported Image File types Application Note
under the
“Support” tab at:
http://www.snellgroup.com/products/conversion-and-restoration/conversion/kudospro
•
A logo file must contain a key. If no key is found the entire image will be displayed
i.e. a rectangle cut-out of the logo image size
•
Maximum logo size of 400 Pixels by picture height (Max. 480 lines)
Note:
This stage can take up to a minute depending on the length of the logo. Short or static
logos will upload in a few seconds.
1
4
---
