IQUDC30/IQUDC31/IQUDC32/IQUDC33
Operation Using the RollCall Control Panel
Issue 1 Rev 4
Page 93
© 2016 SAM
5.18.2 Video Input Logging
The Video Input Logging screen displays the current log information for the video inputs.
Up to five inputs are available. Inputs 1 & 2 are serial SDI and are present on all variants of
rear panel. Input 3 is CVBS (if fitted). Inputs 4 & 5 are SFP inputs (if fitted).
SFP inputs appear if a rear panel with an SFP connection is fitted. The SFP input selections
will appear grayed out if either no SFP module or an unsupported SFP module is inserted in
the rear panel connector.
Note:
Inputs are the physical connections to the rear panel and not inputs to the processing
channels.
Log Field
Description
INPUT_
N
_TYPE=
The type of input as specified by the module’s configuration:
•
HD/SD/3G SDI – SDI BNC serial input connection
INPUT_
N
_STATE=
The current input state:
•
OK – Input signal is good
•
Fail – Input signal is not detected
INPUT_
N
_STANDARD=
The current input standard. See supported input standards
information.
