IQUDC30/IQUDC31/IQUDC32/IQUDC33
Operation Using the RollCall Control Panel
Issue 1 Rev 4
Page 69
© 2016 SAM
5.7.1.2
Status
The Status box shows the input status of the corresponding audio pair in the Source list.
•
PCM: Audio is PCM.
•
Loss: Audio is unavailable or invalid.
•
Data: Audio is non-PCM and not Dolby E.
•
DolbyE: Audio is Dolby E.
5.7.2 Process Pairs
Eight output pairs are available from the routing matrix. These pairs are called the process
pairs, each of which corresponds to a column of radio buttons in the routing matrix.
•
To route an input source pair to a process pair, simply select the radio button that
intersects the desired input pair row, with the desired process pair column.
5.7.2.1
Status
The Status box shows the status of the corresponding process pair.
•
P: Audio pair routed from input sources is PCM.
•
L: Audio pair routed from input sources is not detected (Loss).
•
N: Audio pair routed from input sources in non-PCM.
Note:
The “N” status refers to any valid input that is non-PCM, such as Data, Dolby D, or Dolby E.
