Set the Controller Password
1.
Make sure the remote controller indicator is OFF
2.
Default 000000, new password should be 6 digits
3.
Press “FN” and numeric key “2” simultaneously
4.
Loose the buttons until the indicator is turned ON
5.
Input 6 digits new password, indicator will blink once for each valid digit input.
6.
The indicator will turn OFF after 6 digits successfully input, then new password is set.
Send New Password to Display Security
1.
Make sure the remote controller indicator is OFF
2.
Press “FN” and numeric key “1” simultaneously
3.
Loose the buttons until the indicator is turned ON
4.
Trigger the display security to alarm status
5.
Aim the controller IR emitter to display security IR receiver
6.
Press numeric key “1” to send the new password to display security
7.
Display security will alarm for 20 seconds and the new password is sent
8.
Repeat step 4—7 to send password for other display security
9.
Press “FN” button to exit, indicator will turn OFF again
Set Display Security to Sleep Mode
1.
Make sure the remote controller indicator is OFF
2.
Press “FN” and numeric key “8” simultaneously
3.
Loose the buttons until the indicator is turned ON
4.
Trigger the display security to alarm status
5.
Aim the controller IR emitter to display security IR receiver
6.
Press numeric key “8” to set display security to sleep mode
7.
Display security will alarm for 20 seconds and sleep mode is set
8.
Repeat step 4—7 to set sleep mode for other display security
9.
Press “FN” button to exit, indicator will turn OFF again