BTP-R990 User’s Manual
- 16 -
¾
Supports printer status query and interface module maintenance based on HTTP(only JK-E02
interface supports, while JK-E04 interface does not support)
2) Interface signal definition
Interface adopts 10BASE-T standard in accordance with IEEE802.3. The interface signal is defined as
below:
PIN
Signal Name
Instruction
1
TX+
Data transm
2 TX-
Data transmission -
3 RX+
Data
receiving
+
4 NC Reserve
5 NC Reserve
6 RX-
Data
receiving
-
7 NC Reserve
8 NC Reserve
Pin list of interface module
Socket of Interface module
6.5 WLAN interface
1) Interface
features
¾
Supports 802.11b, 802.11g communication
¾
Supports 9100 port printing, LRP printing
¾
Supports status back
¾
Supports parameter configuration
¾
Supports Firmware update on-line
¾
Supports HTTP
2) Protocols
supported
¾
IP
¾
ARP
¾
ICMP
¾
TCP
¾
UDP
¾
DHCP
¾
TFTP
¾
HTTP
Some wireless interfaces use wireless USB network card, the main specification of which should be
requested from the local distributor or manufacture.
