SNBC BTP-R880NPI, Service Manual

Page: 17 / 45

BTP-R880NPII Service Manual
- 10 -
4 Disassembly and Assembly
Caution:
1) Do not disassemble any parts of the printer or loosen any screw if it works properly;
2) When disassembling parts, please check carefully if the connecting lines are damaged or not;
3) When handling the thermal print head or electronic components, please make sure to use
antistatic gloves or bracelet;
4) During the disassembly, be careful not to leave small parts or screws inside the printer;
5)
Don’t scratch the print head surface.
Assistant material: Lubricant, alcohol, absorbent cotton.
4.1 Maintainance tools

Screw Driver(Philips type)
 Screw Driver (line type)

Wire clamp pliers
4.2 Disassemble the Printer
4.2.1 Disassemble bottom and top covers
Figure Instruction
1.
Top view of printer
2.
Press the latch of the top cover and open it;
disassemble two ST2.6×6 self tapping screws.