Page 23 of 27
System Options
This chapter includes important information about setting system parameters before we start using the HDTV
Receiver. These parameters will affect the audio/video performance of the receiver and requires understanding about
some AV knowledge.
TV System Setup
TV system setup options relate to the display device and its capabilities. HDTV Receiver supports Composite/S-
Video, Component, DVI or HDMI (model dependent). Press
Setup
on your remote control and navigate to the
Options
panel. Navigate to the
Video Settings
option and click
Enter
to see the list of all the available output
options as shown below.
1:
Press the
Setup
button on the remote control to invoke HDTV Receiver’s
Setup
options.
2:
Using the Remote Control’s direction buttons for
Up/Down
, navigate to the
Options
tab and press
Enter
.
3:
Select
Output
and click
Enter
on your remote control to see the list of all the available output options as shown
above. Improper selection may either result in one of the following conditions. If that happens, use the
TV Mode
button to regain video output on the display.
No Image on display device
Black and white picture/green image problem
Border not visible or not full screen picture
HDTV Receiver provides multiple options for HDMI/DVI/Component interfaces to meet both 50Hz and 60Hz
regional requirements. Generally PAL countries use 50 Hz and NTSC use 60 Hz.
Chapter
4
Summary of Contents for SZ130X
Page 1: ......
