Snapper WLT160H42HBV2, Parts Manual

Page: 53 / 92

42" CUTTING DECK ASSEMBLY
Footnotes:
TP 400-5015-6-TC-N
Manual No. 7006449 LAWN TRACTORS ELECTRIC CLUTCH
SERIES H & I
53
Part No Description Item Qty Note
35 7042469 1 WELDMENT, Front Lift Arm, 42 replaces 41480
36 7091585 1 NUT, 3/8-16 Hex Center Lock, GR5 or B
37 7053567 1 ASSEMBLY, Idler Mount Bracket
38 7028942 1 SLEEVE, .5 O.D. x .404 I.D. x .38
39 7018574 1 IDLER, 4.12 Flat
40 7090614 1 BOLT, 3/8-16 x 1-1/2” Hex Flange Lock, GR5
41 7074467 2 NUT, 3/4-16 Hex Flange Jam, GR8
42 7024863 2 PULLEY-5.25 O.D.
43 7024910 1 DECAL - 42 Inch
44 7014852 1 DECAL, Caution (Rotating Blade)
45 7042607 1 WELDMENT, Sector Lift, Left Hand- 42”
45 7042606 1 WELDMENT, Sector Lift, Left Hand- 42” used on LT160H42HBV2 & 42”
Series “I”
46 7014407 2 WASHER, Spindle
47 7091580 1 BOLT, 3/8-16 x 1-3/4” Hex Flange Lock, GR5
48 7091601 3 NUT, 5/16-18 Hex Flange Lock, GR5
49 7014852 1 DECAL, Caution (Deflector in Place) used on Series “H” Models
49B 7046720 1 DECAL, Chute/Deflector used on Series “I” Models
50 7091588 12 BOLT, 3/8-16 x 3/4” Hex Flange Lock Was 90612
51 7026691 2 BLADE, 21” Standard Lift
52 7012063 4 WASHER, Cone, 13/32 x 1-13/32” Diameter
53 7090824 2 SCREW, 3/8-24 x 1-1/4” Hex Head Cap, GR5
54 7091303 2 BOLT, 5/16-18 x 1” Short Neck Carriage, GR5
55 7090799 2 BOLT, 5/16-18 x 5/8” Short Neck Carriage, GR5
56 7091503 2 HAIR PIN, 3/32 x 1.5”
57 7011791 2 RETAINER, 5/16” Bolt
58 7091315 2 WASHER, 5/16” Split Lock
59 7091537 2 WING LOCKNUT, 5/16-18
60 7051914 2 ASSEMBLY, Spindle Housing, 42” Deck Was 59723
61 7034202 1 PLATE, Support
62 7027168 2 SCREW, 5/16-18 x 1” Hex Head Cap, GR5 Was 90636
63 7035835 4 POST Anti-Scalp
64 7091328 4 SCREW, 3/8-16 x 1-1/4” Hex Head Cap, GR5